Raster Dataset
Tags
HJ Andrews Experimental Forest,
climate modeling, Blue River Watershed, Oregon, climate data, air temperature, mapping,
climate change, Willamette Basin, radiation
Display or analysis requiring spatially distributed mean monthly termperature maps over the HJ Andrews.
October Mean Monthly Minimum Temperature Maps of the HJ Andrews adjusted to account for effects of radiation and sky view factor. Maps were developed using PRISM (Parameter-elevation Regressions on Independent Slopes Model), developed by Dr. Christopher Daly at the Spatial Climate Analysis Service. Grids were exported into ASCII format from GRASS GIS software; values are in degrees C x 100.
There are no credits for this item.
See data access policy at www.fsl.orst.edu/lter (especialy the data use policy)
Extent
West | -122.292380 | East | -122.058938 |
North | 44.297235 | South | 44.165482 |
Maximum (zoomed in) | 1:5,000 |
Minimum (zoomed out) | 1:150,000,000 |
ms02910.zip
ground condition
While substantial efforts are made to ensure the accuracy of data and documentation, complete accuracy of data sets cannot be guaranteed. All data are made available "as is". The Andrews LTER shall not be liable for damages resulting from any use or misinterpretation of data sets.
Available on-line
See data access policy at www.fsl.orst.edu/lter (especialy the data use policy)
Caution must be taken when using estimated temperatures for areas outside the HJA boundaries shown in the maps. This is because environmental processes within the Lookout Creek watershed were used to quantify the effects of elevation, canopy, cloudiness, and topography on temperatures, and these effects were extrapolated to other areas, where in fact environmental processes may affect temperatures differently. Because adjustments may have obscured sensitive long-term trends in the datasets, caution should also be taken when using the final dataset to investigate evidence of long-term climatic events in the HJA, such as those associated with PDO (Pacific Decadal Oscillation) or ENSO (El Nino/Southern Oscillation) phenomena.
In any research project that bases its methodology on hypothesized quantifications of natural phenomena, there can be many sources of uncertainty. In this project, errors were not additive throughout the process because of the way in which the methodology was conducted (for example, the selective elimination of sites from the analysis at certain stages). Thus, the potential sources of error must be examined at each step independently of one another. Though a formal error analysis could not be done because of low confidence in the historical dataset as a whole, the following discussion attempts to quantify potential sources of uncertainty. Historical temperature data at the HJA have been gathered using partially shielded mercury bulb thermometers and thermisters. Instrumentation error for mercury thermometers (used for about two-thirds of the total period of record) was approximately ± 2.0°C, with another ± 2.0°C error introduced when digitizing the paper charts. Thermisters, installed by the early 1990s at all sites, are accurate to approximately ± 0.4°C (J. Moreau, pers. comm.). The inconsistency of sensor heights above the ground may also have been a source of error, though probably a small one. Mean monthly temperatures were less likely to have been affected by these observational errors than the original daily datasets. Mean monthly temperatures at sites with short records were adjusted to the full 30-year period using the highest correlated long-term site. For maximum temperature adjustments, mean absolute errors for periods of record ranged from 1.1°C for a one-year period of record to 0.2°C for a 24-year period of record (0.6°C to 0.2°C for minimum temperatures). The shorter the period of record for a short-term site, the greater the error, but potential temperature errors never exceeded 0.7°C because any site with less than three years of original data was not considered (mean absolute errors for maximum and minimum temperatures were 0.7°C to 0.6°C for three-year periods of record, respectively). Thus, errors introduced into the procedure by temporal adjustments were likely minimal compared to observational errors. Error estimates of the temperature interpolation process were made using a jackknife cross-validation procedure within PRISM. At each station location, PRISM was run without that station to estimate the temperature at its location, and the predicted values were compared to the observed station value. Mean absolute errors, which are the average of the absolute value of error, ranged from 0.5°C to 0.9°C for maximum temperatures, and from 0.1°C to 0.3°C for minimum temperatures throughout the year. Biases, which assess how high or low estimates are across the entire grid, ranged from +0.1°C to +0.3°C for maximum temperatures, and from 0.0°C to +0.1°C for minimum temperatures. All of these values are well within observational error, and show that spatial interpolation of temperatures introduced low levels of uncertainty to the process. There were other possible sources of error in the original temperature datasets. Forest edges (boundary areas between clearings and forests) and streams probably affected long-term monthly temperature values. Many climate stations in the HJA have been and are located within distances that may be affected by edges and streams. These physical features could not be accounted for in this study because necessary datasets did not exist to quantify them. This study also did not quantify scale-dependent temperature advection processes that may affect temperatures in the HJA. For example, temperature regimes on an even, broad north-facing slope are likely different than those on a small north-facing slope having several slopes of varying orientation nearby.
10 meter DEM for the area was resampled to 50 meter cells
After mean monthly temperature grids were generated with PRISM, the GRASS GIS program (United States Army - Construction Engineering Research Laboratory, 1992) was used to add the effects of radiation and sky view factors to them, using the IPW grids and original regression functions. Only topographic effects of radiation and sky view factors were applied; vegetation was not reintroduced to the process. For maximum temperatures, the difference between solar radiation on a flat open surface and the topographically-correct surface was calculated over each DEM pixel. Changes to monthly maximum temperatures were then applied over each grid based on the temperature/radiation regression functions.
Original datasets consisted of daily mean, maximum and minimum temperatures that had been quality-checked and processed into a consistent format. Missing data were indicated and questionable values were flagged according to a number of conditions (Bierlmaier, pers. comm.) Any value flagged in any way during this first filtering process was immediately discarded from the database and transformed into a missing value for that day. Daily temperatures were graphed and visually analyzed again on monthly and yearly scales to check for erroneous values possibly missed during the first filtering process. Again, any questionable values were discarded, ensuring the most reliable possible dataset. For the MET sites with variable sensor heights, the 1.5 meter values were used unless that value was missing, in which case the next lower sensor (2.5 meters) was used. After filtering twice, any site left with less than three years of data (10% of the 30-year period) was discarded. The GR sites were an exception to this rule because of their strategic locations in underrepresented areas or next to open MET sites (making them ideal for open/closed canopy comparisons). Most discarded sites are in areas that are adequately represented spatially by long-term sites. After mean monthly maximum and minimum temperature datasets were adjusted with regression functions to simulate open flat sites, they were imported into PRISM. PRISM uses a combination of geographic and statistical methods to spatially interpolate climate variables (Daly et al., 1994). It is a coordinated set of rules, decisions, and calculations (an ‘inference engine’) designed to mirror the decision-making process an expert climatologist would use in making a map (Daly and Johnson, 1999). Weights are assigned to the point data according to various factors. A station is downweighted when its elevation differs significantly from that of the target cell or is far from it geographically. The station’s influence is further reduced if it is clustered with others (avoiding over-representation), or has a significantly different slope and aspect (topographic facet) than the target cell (Daly et al., 1997). When used on large areas, PRISM is able to consider a station’s proximity to the ocean and the ‘flatness’ of an area to determine whether two-dimensional or three-dimensional estimates should be used (Daly and Johnson, 1999). These last two factors are not important in this study, because the HJA is a small area 150 kilometers from the nearest ocean and is hilly enough to require only the three-dimensional model. An iterative approach was taken in creating the gridded data for the temperature maps. With the exception of the stream sites, all canopy/topography-adjusted maximum and minimum temperature datasets were initially input into PRISM, using default parameters and a single-layer atmosphere model. The resulting grids clearly showed which sites to initially discard. For example, the unusually warm sites RS38, RS89, and H15MET were visually obvious as high temperature ‘bulls eyes’. All GR sites were revealed to be anomalously warm and were also discarded. Other sites such as CS2MET, RS02 and RS86 were also discarded because of warm or cold spatial biases. Including RS01’s data caused unusual temperature patterns due to the seasonal presence of Blue River Reservoir. From initial PRISM modeling and personal experience, VANMET was known to be anomalously warm and RS04 anomalously cool. In order to retain spatial representation in their area, a ‘pseudo-site’ was created at point between them on the DEM, with temperature values given as their averages for each month. Using this pseudo-site instead of VANMET and RS04 individually gave far more realistic temperatures on top of the northern peaks and ridges of the HJA. The National Climatic Data Center’s 500-millibar (approximately 5200 meters) 2.5° global temperature grid was used as a high-level anchor ‘site’ over the HJA to ensure that the tops of the highest peaks and ridges in the area were modeled correctly. Table 4.26 summarizes the sites used in the final analysis. With the exception of the Mack Creek area, most regions within the HJA are fairly well-represented spatially, having a measurement station within about two kilometers. PRISM was run again with the reduced set of sites. Since the number of sites had been decreased to 15, the radius of influence was specified to consider every point in the HJA when making cell estimates. Even using a single atmospheric layer model with this specification, a temperature inversion over the lower Lookout Creek Valley was evident during most months for both maximum and minimum temperatures. The maximum temperature inversion is more defined in January (at an elevation of approximately 700 meters), with minimum temperature inversions well-defined in both January and July at approximately 720 meters. Taking the base elevation of the Lookout Creek valley to be 420 meters, depths of inversions over it were approximately 280 meters for maximum temperatures and 300 meters for minimum temperatures. We thus switched to the two-atmosphere model in PRISM with these inversion height values specified. A certain amount of ‘cross-talk’ was allowed between layers to avoid an unnaturally abrupt transition between layers. Elevations were buffered by ± 150 meters for maximum temperature and ± 120 meters for minimum temperatures, reflecting the higher seasonal variation in minimum temperature inversion heights. Variable inversion heights with elevation were modeled such that the deepest inversions were found at the lowest elevations (over the lower Lookout Creek and McKenzie River valleys). The two-layer atmosphere model was used to model both maximum and minimum temperatures for every month. All of the final parameter values used to make the grids were determined by varying them slightly in different combinations, then iteratively running PRISM and analyzing the results both statistically (with regression functions through the PRISM interface) or visually (with the temperature grids). In this way, knowledge of HJA microclimatology could be applied and combined with PRISM’s statistical abilities to create maps that were not only numerically sound, but made sense physically. Citations for PRISM: Daly, C., E.H. Helmer, and M. Quinones. 2003. Mapping the climate of Puerto Rico, Vieques, and Culebra. International Journal of Climatology, 23: 1359-1381. Daly, C., W. P. Gibson, G.H. Taylor, G. L. Johnson, P. Pasteris. 2002. A knowledge-based approach to the statistical mapping of climate. Climate Research, 22: 99-113. Daly, C., R.P. Neilson, and D.L. Phillips. 1994. A statistical-topographic model for mapping climatological precipitation over mountainous terrain. Journal of Applied Meteorology 33: 140-158.
projected from NAD27 to NAD83
Per US Forest Service Standards
m-f 8:00am-4:00pm
ground condition
m-f 8:00am-4:30pm
as time permits
Obtain information off of WWW site, call contact person for special requests.
raster dataset
metadata on-line
degrees C x 100
FSDB metadata
number generated by computer model output.
cell count per value
esri documentation
number generated by computer program, based on number of cells with a particular value.
values are in degrees C x 100
Thesis Title: MAPPING THE THERMAL CLIMATE OF THE H. J. ANDREWS EXPERIMENTAL FOREST, OREGON
FSDB Code
m-f 8:00am-4:00pm
values are in degrees C x 100
http://andrewsforest.oregonstate.edu/pubs/biblio/abstract.cfm?Catalog_id=3347&topnav=175