Shapefile
Tags
Oregon, Linn County,
Andrews Experimental Forest, Tillamook County, Yamhill County, Jackson County, Curry County,
Washington County, Douglas County, Lincoln County, Hood River County, Benton County, Lane
County, Clackamas County, Columbia County, Marion County, Clatsop County, Josephine County,
Coos County, Geologic hazard, Multnomah County, Polk County, Potential Rapidly Moving
Landslide hazard
To address the most dangerous landslide hazards in Oregon systematically.
Landslides are a serious geologic hazard, threatening public safety, natural resources, and infrastructure, and costing millions of dollars for repairs each year in Oregon. This map of areas where rapidly moving landslides pose hazards in western Oregon is part of the State's attempt to protect lives and property. The overview map delineates zones that are prone to landslide hazards, especially rapidly moving landslides. These zones provide information to local governments about property that might require more site-specific evaluation. The map is in digital format and was produced with data at a scale of 1:24,000 (1 in. = 2,000 ft). Creation of the map involved the use of Geographic Information System (GIS) modeling, checking and calibrating with limited field evaluations, and comparing with historic landslide inventories. The extent and severity of the hazard posed by rapidly moving landslides varies considerably across western Oregon. In general, the most hazardous areas are mountainous terrains, which are usually sparsely populated, especially drainage channels and depositional fans associated with debris flows. Where hazard areas intersect with human development, use of the map can help to assess the risk and prioritize risk-reduction activities. Various options are available to reduce the risk of landslide losses. Risk-reduction activities can include engineering solutions, public education, warning systems, temporary road closures and evacuation, land use regulation, and many other options. Although this project addresses a range of rapidly moving landslides, this map is not a compilation of all possible landslide hazards.
R. Jon Hofmeister, Oregon Department of Geology and Mineral Industries
Although these data have been processed successfully on a computer system at the Oregon Department of Geology and Mineral Industries (DOGAMI), no warranty expressed or implied is made regarding the accuracy or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data. It is strongly recommended that these data are directly acquired from DOGAMI, and not indirectly through other sources which may have changed the data in some way. It is also strongly recommended that careful attention be paid to the contents of the metadata file associated with these data. The Oregon Department of Geology and Mineral Industries shall not be held liable for improper or incorrect use of the data described and/or contained herein.
Extent
West | -122.261722 | East | -122.100847 |
North | 44.281956 | South | 44.197704 |
Maximum (zoomed in) | 1:5,000 |
Minimum (zoomed out) | 1:150,000,000 |
Digital map information in vector format is provided for each of 19 western Oregon counties. GIS file formats provided include MapInfo .tab and ArcView .shp. This data was clipped to the boundary of the Andrews Experimental Forest. Data for the 19 western Oregon counties are available on request
R. Jon Hofmeister, Oregon Department of Geology and Mineral Industries
publication date
Access constraints: None
Use constraints: This map is in digital format and was produced with data at a scale of 1:24,000 (1 in. = 2,000 ft). Therefore, the information it provides is appropriate only at that scale or a smaller scale (e.g., 1:48,000) and cannot show greater detail if viewed at any larger scale.
Although these data have been processed successfully on a computer system at the Oregon Department of Geology and Mineral Industries (DOGAMI), no warranty expressed or implied is made regarding the accuracy or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data. It is strongly recommended that these data are directly acquired from DOGAMI, and not indirectly through other sources which may have changed the data in some way. It is also strongly recommended that careful attention be paid to the contents of the metadata file associated with these data. The Oregon Department of Geology and Mineral Industries shall not be held liable for improper or incorrect use of the data described and/or contained herein.
Polygon feature and attribute table
Oregon Department of Geology and Mineral Industries
Internal feature number.
ESRI
Feature geometry.
ESRI
Area of landslide hazard feature in square meters
GIS software
unique identifier for each polygon
GIS software
Perimeter of landslide hazard feature in meters
GIS software
Potential rapidly moving landslide hazard zone
Oregon Department of Geology and Mineral Industries
Access constraints: none
Access constraints: none
Landslides are a serious geologic hazard, threatening public safety, natural resources, and infrastructure, and costing millions of dollars for repairs each year in Oregon. This map of areas where rapidly moving landslides pose hazards in western Oregon is part of the State's attempt to protect lives and property. The overview map delineates zones that are prone to landslide hazards, especially rapidly moving landslides. These zones provide information to local governments about property that might require more site-specific evaluation. The map is in digital format and was produced with data at a scale of 1:24,000 (1 in. = 2,000 ft). Creation of the map involved the use of Geographic Information System (GIS) modeling, checking and calibrating with limited field evaluations, and comparing with historic landslide inventories. The extent and severity of the hazard posed by rapidly moving landslides varies considerably across western Oregon. In general, the most hazardous areas are mountainous terrains, which are usually sparsely populated, especially drainage channels and depositional fans associated with debris flows. Where hazard areas intersect with human development, use of the map can help to assess the risk and prioritize risk-reduction activities. Various options are available to reduce the risk of landslide losses. Risk-reduction activities can include engineering solutions, public education, warning systems, temporary road closures and evacuation, land use regulation, and many other options. Although this project addresses a range of rapidly moving landslides, this map is not a compilation of all possible landslide hazards.
To address the most dangerous landslide hazards in Oregon systematically.
Digital map information in vector format is provided for each of 19 western Oregon counties. GIS file formats provided include MapInfo .tab and ArcView .shp. This data was clipped to the boundary of the Andrews Experimental Forest. Data for the 19 western Oregon counties are available on request
publication date
None
This map is in digital format and was produced with data at a scale of 1:24,000 (1 in. = 2,000 ft). Therefore, the information it provides is appropriate only at that scale or a smaller scale (e.g., 1:48,000) and cannot show greater detail if viewed at any larger scale.
R. Jon Hofmeister, Oregon Department of Geology and Mineral Industries
Very good. The landslide model data output, while gradational, was queried to develop only the high-hazard zone. This output is subject to little or no attribute accuracy errors.
Spatial data is presented in the form of polygons delineating potential rapidly moving landslide hazard zones, areas not in hazard zones are not accounted for spatially. This dataset does not have topology.
The text and accompanying map data are designed to identify areas subject to rapidly moving landslide hazards for 19 western Oregon counties.
The map data are intended to be used at a scale of 1:24,000, and the hazard information is stored at the original 10-meter DEM (digital elevation model) spacing.
U.S. Geological Survey National Map Accuracy Standard for 1:24,000 scale topographic quadrangle maps.
The text accompanying IMS-22 describes the GIS model, calibrations, and limited field evaluations used to derive the polygons, and contains a complete listing of references cited.
This landslide data was developed through an iterative process that included multiple phases of GIS screening, field data collection, inventory comparisons, and peer reviews.
For this final release of the data, further processing by GIS software was done to improve data quality. The following tasks were completed:
-the county boundary file was corrected to remove small 'no data' areas , and checked for topology.
-the Oregon coast shoreline was improved using a NOAA-developed shoreline file obtained from the Oregon Department of Land Conservation and Development.
-a 100-meter westward buffer was applied to the new shoreline along the entire Oregon coast.
-a 100-meter buffer was applied beyond the perimeter of each county data file (and subsections) to ensure data continuity.
-very small polygons (<450 square meters) were removed.
Metadata imported.
Data was clipped to the boundary of the Andrews Experimental Forest
The digital map information contains polygon entities and is organized by county. Polygon data is provided for each of the 19 western Oregon counties. For each county, the polygon file contains a unique ID number, AREA, PERIMETER, and a field labeled RML_hazard. Polygon entities delineate high-hazard zones for potential rapidly moving landslides and have the domain label True.
IMS-22 GIS Overview Map of Potential Rapidly Moving Landslide Hazards in Western Oregon
Although these data have been processed successfully on a computer system at the Oregon Department of Geology and Mineral Industries
(DOGAMI), no warranty expressed or implied is made regarding the accuracy or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data. It is strongly recommended that these data are directly acquired from DOGAMI, and not indirectly through other sources which may have changed the data in some way. It is also strongly recommended that careful attention be paid to the contents of the metadata file associated with these data. The Oregon Department of Geology and Mineral Industries shall not be held liable for improper or incorrect use of the data described and/or contained herein.