UW001

Attribute: LABNOTES

code		description
ASINSIG		The result for dissolved arsenic slightly greater than total arsenic is statistically insignificant (< 20% RPD)
ASMOLYINSIG		The result for dissolved arsenic slightly greater than total arsenic is statistically insignificant (< 20% RPD). The result for dissolved molybdenum is slightly greater than total molybdenum. Because the difference is st
BODNON		The result for BOD is not reportable because of failed QC (blank > 0.2 depletion). However, the results indicate that the BOD is < 10 mg/l.
BODRPD		BOD: the RPD for duplicate analysis exceeds the control limit, but is not applicable because the results are less than 5 times the MRL.
CHLEXPLAIN		The presence of a small green leaf was noted in the sample bottle provided for chlorophyll-a analysis. This probably explains the presence of chlorophyll-a in the rinsate sample.
CHLORIDE		The sample returned a result of 4.7 mg/l chloride. This is the only value of any kind for chloride testing in this data set. Method: EPA 300.0
CRINSIG		The result for dissolved chromium is slightly greater than total chromium. Because the difference is statistically insignificant (< 20% RPD), the sample was not re-analyzed.
CUINSIG		The result for dissolved copper is slightly greater than total copper. Because the difference is statistically insignificant (< 20% RPD), the sample was not re-analyzed.
CUPBINSING		The result for dissolved copper is slightly greater than total copper. Because the difference is statistically insignificant (< 20% RPD), the sample was not re-analyzed. The result for dissolved lead is slightly greater
ENTERO		The sample tested positive for Enterococcus from a bird source and negative for Enterococcus from a human source. Refer to contract laboratory report for detailed information on the analysis for sources of Bacteroidetes
FECALQ		The final reading for fecal coliform bacteria was done 11 minutes past the incubation period of 24 +/- 2 hrs. The result was probably not affected, but could be biased slightly high.
FILTER		RAD: Lab filtering blank
MAGCAL		Analysis for magnesium and calcium to calculate hardness was performed by EPA method 200.8.
MANG		Manganese was analyzed by EPA method 200.7, ICP-AES.
MANGINSIG		The result for dissolved manganese is slightly greater than total manganese. Because the difference is statistically insignificant (< 20% RPD), the sample was not re-analyzed.
MOLYINSIG		The result for dissolved molybdenum is slightly greater than total molybdenum. Because the difference is statistically insignificant (< 20% RPD), the sample was not re-analyzed.
NONPOL		Since the result for total oil and grease is <5 mg/l, non-polar oil and grease is also < 5 mg/l.
NONPOLPEST		Since the result for total oil and grease is <5 mg/l, non-polar oil and grease is also < 5 mg/l.The results for pesticides that were detected at a level less than the reporting limit are reported as estimates.
ORTHO		This sample was filtered for ortho-phosphate the day after collection.
PAHLIMIT		Analysis for PAH compounds detected phenathrene at a concentration just below the reporting limit of 0.10 ug/l.
PBINSIG		The result for dissolved lead is slightly greater than for total lead. Because the difference is statistically insignificant (< 20% RPD), the sample was not re-analyzed.
PEST		The results for pesticides that were detected at a level less than the reporting limit are reported as estimates.
REPORT_TC1_1		An additional parameter analysis was completed for this sample, but the parameter analyzed is unknown. The type of analysis conducted was recorded as "refer to contract report" with a measured value of 10 ng/l. Method: E
REPORT_TC1_2		An additional parameter analysis was completed for this sample, but the parameter analyzed is unknown. The type of analysis conducted was recorded as "refer to contract report" with a measured value of <10 ng/l. Method:
REPORT_TC1_3		An additional parameter analysis was completed for this sample, but the parameter analyzed is unknown. The type of analysis conducted was recorded as "refer to contract report" with a measured value of 1400 ng/l. Method:
REPORT_TC1_4		An additional parameter analysis was completed for this sample, but the parameter analyzed is unknown. The type of analysis conducted was recorded as "refer to contract report" with a measured value of 360 ng/l. Method:
REPORT_TC1_5		An additional parameter analysis was completed for this sample, but the parameter analyzed is unknown. The type of analysis conducted was recorded as "refer to contract report" with a measured value of 3400 ng/l. Method:
REPORT_TC2_1		An additional parameter analysis was completed for this sample, but the parameter analyzed is unknown. The type of analysis conducted was recorded as "refer to contract report" with a measured value of 10 ng/l. Method: E
REPORT_TC2_2		An additional parameter analysis was completed for this sample, but the parameter analyzed is unknown. The type of analysis conducted was recorded as "refer to contract report" with a measured value of 20 ng/l. Method: E
TSSAVG		TSS result is an average of 3 replicates; sample matrix was difficult to keep in suspension for analysis due to sandy particulate.
TSSDRY		TSS: sample was filtered and dried but was not re-weighed.
TSSRPD		TSS RPD is not relevant because one of the sample results was less than 5
TSSRPDDUP		TSS: duplicate RPD result is not applicable because sample results are less than 5 times the MRL.
ZNINSIG		The result for dissolved zinc is slightly greater than total zinc. Because the difference is statistically insignificant (< 20% RPD), the sample was not re-analyzed.